How to install bathtub faucet
install bathtub faucet
1. Installation of single hole basin faucet. Pay attention to the
diameter of the water outlet when purchasing the single handle hand basin faucet. Most of the water in the
market belongs to the hard pipe, so you should pay attention to reserve the height of the upper nozzle. 35
work points from the basin to the bottom is the most appropriate. When installing, special angle valve
must be selected, and the angle valve must be fixed with the hot and cold water pipe of wall water outlet.
When you find that there is a distance between the angle valve and the tap water pipe, go to buy a special
extension pipe to connect.
2. Installation of thermostatic tap. Before the thermostatic faucet,
please check whether the water pipe is hot on the left and cold on the right. Remember not to connect the
hot and cold water pipes wrongly, so as to prevent the tap from working normally. Gas and solar water
heaters cannot use thermostatic faucets because the water pressure is too low. Please don't forget to
install hot and cold water filter when installing thermostatic faucet.
3. Installation of shower
and bathtub faucet (wall mounted) when you purchase shower, bathtub and wall faucet, you can select the
appropriate height to bury the outlet pipe. The distance between hot and cold water pipes must be 15 cm.
Before installation, you must not forget to flush the water pipe, so as to avoid the water quality being
too hard and damaging the tap.
4. Concealed shower and Bathtub Faucet: after purchasing the
concealed faucet, the valve core of the faucet should be embedded in the wall. Pay attention to the
thickness of toilet wall before embedding. If the wall is too thin, the valve core will not be embedded.
The plastic protective cover of the valve core should not be removed easily when the valve core is
embedded, so as to avoid damage to the valve core by cement and other miscellaneous matters. In addition,
when the valve core is embedded, attention should be paid to the direction of the valve core up and down,
left and right, so as to avoid the wrong embedding of the valve core. When the wall mounted faucet is
embedded with water inlet pipe, the size deviation can be adjusted by using the adjustable inflector.
How to install bathtub faucet
1. Clean the faucet surface with
clean water and dry it with soft cotton cloth before scrubbing, and then wipe it gently with neutral
detergent to keep the surface clean.
2. Do not use any abrasive cleaner, hard cloth, paper towel
or steel ball, and any acid, rough detergent or soap to wipe the surface of the tap.
cleaning: remove the bubble head, take out the filter screen, and brush the filter screen with a
toothbrush or small brush under the faucet.
About the bathtub faucet installation related
knowledge, we introduced here for everybody. In the bathtub faucet installation, not only should pay
attention to the above precautions, but also need to pay special attention to the height of the bathroom
faucet, the height of the family is different, so we need to take a suitable height to install the
Key points of choosing kitchen faucet
On the importance of bathroom enterprise design